13561336157
订购热线电话:
集生产,销售为一体
自主创新   自主开发   自主研制

山东朝帆机械有限公司

Shandong zhaofan machinery co. LTD
产品中心
吸尘铣刨机
    发布时间: 2019-01-19 16:52    

此产品是我公司自主研发生产、区别与传统的新型铣刨机其自带的吸尘效果、能有效的保护施工人员的身体健康并且对环境的污染降到最低、

适用于;

1、公路市政养护中,沥青路面涌包,车辙,网裂,坑槽部位的铣刨清除。清除桥面和路面的冰雪。

2、去除地面涂层、油漆、各种交通标线;地面受损、积污需要翻新时,去除旧地坪表面等。

3、清除机场道路标线,飞机跑道轮胎制动痕迹等,重新获得摩擦系数很高的粗糙表面。

4、对水泥沥青路面、高速公路桥面、桥梁错台,环氧树脂耐磨地面的超标高部位进行铣削调平

5、道路微表处施工,对原有旧路面面层进行铣刨清除,为稀浆封层作准备.

This product is a new type of milling machine developed independently by our company. Its own dust absorption effect can effectively protect the health of the builders.

Apply to;

1, road maintenance, asphalt pavement, rutting, mesh cracks, milling of the pit slot clearance. Remove snow and ice on bridge deck and road surface. 3、沥青砼新铺前对原有旧路面轻度拉毛,或配合大型铣刨机完成边角区域和钢筋密布区域的铣刨拉毛。

2. Remove ground coatings, paints and traffic markings; remove old floor surfaces when damaged or contaminated ground needs renovation. 5、清除机场道路标线,飞机跑道轮胎制动痕迹等,重新获得摩擦系数很高的粗糙表面。

3. Removing the markings of airport roads and tire brake marks on the runway, the rough surfaces with high friction coefficient can be obtained again. 6、对水泥沥青路面、高速公路桥面、桥梁错台,环氧树脂耐磨地面的超标高部位进行铣削调平

4. Milling and leveling the over-elevation parts of cement asphalt pavement, Expressway deck, bridge staggered platform and epoxy resin wear-resistant ground 7、道路微表处施工,对原有旧路面面层进行铣刨清除,为稀浆封层作准备.

5. Road micro-surfacing construction, the original surface of the old road surface milling and planing to remove, for slurry seal preparation. 


下一个: 铣刨机
PRODUCT Center